P0888
TCM Power Relay Sense Circuit
Some gearboxes draw their power through a relay, such as the transmission control relay in Chrysler's fuse box that feeds the solenoids. P0885 to P0887 cover the coil control of that relay, P0888 to P0892 its sense line, which reads back the switched output and compares it with the command. A dead relay leaves all solenoids without power, so the gearbox drops into its hydraulic emergency gear. P0888 is the general fault of the sense line, without telling low, high or range apart. No maker documents it on its own; Subaru uses the low variant P0890.
Possible causes
- Relay contacts burnt or corroded high
- Fuse in the load circuit medium
- Wire between relay output and module medium
- Module low
Symptoms
- MIL on
- Limp mode in a fixed gear, no shifting
- Harsh engagement into D or R
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0888
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.