P0886
TCM Power Relay Control Circuit Low
Some gearboxes draw their power through a relay, such as the transmission control relay in Chrysler's fuse box that feeds the solenoids. P0885 to P0887 cover the coil control of that relay, P0888 to P0892 its sense line, which reads back the switched output and compares it with the command. A dead relay leaves all solenoids without power, so the gearbox drops into its hydraulic emergency gear. P0886 means the coil control line is shorted to ground or the driver reports a short, so the relay pulls in unintentionally or the driver shuts down. No maker documents the code; its neighbours P0885 and P0887 are documented by Ford and FCA.
Possible causes
- Control wire chafed to ground high
- Relay coil shorted medium
- Module driver faulty low
Symptoms
- MIL on
- Limp mode possible
- Relay does not click or stays pulled in
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0886
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.