OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0885

TCM Power Relay Control Circuit/Open

Some gearboxes draw their power through a relay, such as the transmission control relay in Chrysler's fuse box that feeds the solenoids. P0885 to P0887 cover the coil control of that relay, P0888 to P0892 its sense line, which reads back the switched output and compares it with the command. A dead relay leaves all solenoids without power, so the gearbox drops into its hydraulic emergency gear. P0885 means the coil circuit is open; the module checks its relay driver output at key-on. Ford lists it in its powertrain code list with or without MIL depending on vehicle; on FCA's 948TE nine-speed in the 2015 Cherokee and Chrysler 200 it was cured with a gearbox module reflash.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 85

Possible causes

  • Relay faulty (coil open) or missing high
  • Wire between relay and module open, connector or fuse box contact high
  • Fuse of the relay coil blown medium
  • Module software (FCA 948TE reflash) medium

Symptoms

  • MIL on
  • Limp mode in a fixed gear, no shifting
  • Harsh engagement into D or R

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0885

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication