P0881
TCM Power Input Signal Range/Performance
The TCM power input codes watch the supply voltage of the gearbox module or of its solenoid supply. Without a proper supply all solenoids go dead and the gearbox falls back to its hydraulic emergency gear with maximum line pressure: a fixed gear, harsh engagement, no shifting. Ford's external gearbox modules check a window of 9 to 16 V; GM reports the same under P0562/P0563. P0881 means the supply is electrically within range but implausible, for example differing from the engine module's system voltage or dipping when the solenoids switch on. No maker publishes a strategy for it.
Possible causes
- Contact resistance in supply or ground, voltage drop under load high
- Alternator or battery problem medium
- Relay with worn contacts medium
- Internal measurement of the module faulty low
Symptoms
- MIL on
- Occasional harsh shifts
- Limp mode possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0881
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.