OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P087E

Clutch Position Sensor B Circuit Intermittent

Clutch position sensor B reports the position of the second clutch or its actuator, the counterpart of sensor A (P0805 ff). The only documented user is Ford's dry DPS6 dual clutch in Fiesta and Focus: clutch B, for reverse and the even gears, is moved by a three-phase motor whose Hall sensors give its position, and the gearbox module drives it through an internal motor driver. Ford sets P087E for a sequence fault: when the clutch B motor turns, its three Hall sensors produce a fixed pattern; if a step is skipped or the order is wrong, motor and clutch position become unreliable. Typical are sporadic Hall dropouts and loose contacts. The counterpart for clutch A is P0809.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 7E

Possible causes

  • Hall sensor in the clutch B motor dropping out high
  • Loose contact at motor or module connector medium
  • Motor sluggish or slipping mechanically low
  • Evaluation in the gearbox module faulty low

Symptoms

  • MIL or transmission warning on
  • Sporadic judder when pulling away or shifting
  • Delayed gear changes

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P087E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication