P087D
Clutch Position Sensor B Circuit High
Clutch position sensor B reports the position of the second clutch or its actuator, the counterpart of sensor A (P0805 ff). The only documented user is Ford's dry DPS6 dual clutch in Fiesta and Focus: clutch B, for reverse and the even gears, is moved by a three-phase motor whose Hall sensors give its position, and the gearbox module drives it through an internal motor driver. For P087D no maker is documented. It means the sensor signal is above its limit: an open signal or ground wire with a pull-up, or a short to voltage. As with sensor A (P0808), clutch B can then no longer be position-controlled and the gearbox goes into limp mode.
Possible causes
- Signal or ground wire open high
- Signal wire shorted to voltage medium
- Sensor faulty medium
Symptoms
- MIL or transmission warning on
- Jerky take-off or shifts
- Reverse or even gears missing, limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P087D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.