P087C
Clutch Position Sensor B Circuit Low
Clutch position sensor B reports the position of the second clutch or its actuator, the counterpart of sensor A (P0805 ff). The only documented user is Ford's dry DPS6 dual clutch in Fiesta and Focus: clutch B, for reverse and the even gears, is moved by a three-phase motor whose Hall sensors give its position, and the gearbox module drives it through an internal motor driver. For P087C no maker is documented; Ford folds Hall faults into P087B. The code means the sensor signal is below its limit: signal wire shorted to ground, supply missing or a sensor without output. As with sensor A (P0807), clutch B can then only run in limp mode.
Possible causes
- Signal wire shorted to ground high
- 5 V supply to the sensor open medium
- Sensor faulty medium
- Module reference disturbed low
Symptoms
- MIL or transmission warning on
- Jerky take-off or shifts
- Reverse or even gears missing, limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P087C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.