P087B
Clutch Position Sensor B Circuit Range/Performance
Clutch position sensor B reports the position of the second clutch or its actuator, the counterpart of sensor A (P0805 ff). The only documented user is Ford's dry DPS6 dual clutch in Fiesta and Focus: clutch B, for reverse and the even gears, is moved by a three-phase motor whose Hall sensors give its position, and the gearbox module drives it through an internal motor driver. Ford sets P087B for a Hall sensor fault on the clutch B motor: one Hall signal is missing or implausible, so the module no longer knows the motor and clutch position reliably. The counterpart for clutch A is P0806. Judder, missed shifts and limp mode follow, with MIL.
Possible causes
- Hall sensor in the clutch B motor faulty high
- Wiring or connector between motor and gearbox module medium
- Input of the gearbox module faulty medium
- Water ingress or corrosion low
Symptoms
- MIL or transmission warning on
- Jerky take-off or shifts
- Gears skipped, vibration
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P087B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.