OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P087A

Clutch Position Sensor B Circuit

Clutch position sensor B reports the position of the second clutch or its actuator, the counterpart of sensor A (P0805 ff). The only documented user is Ford's dry DPS6 dual clutch in Fiesta and Focus: clutch B, for reverse and the even gears, is moved by a three-phase motor whose Hall sensors give its position, and the gearbox module drives it through an internal motor driver. Ford sets P087A for a fault in that internal driver; wiring faults of the motor have their own codes (P090A, P090C, P090D). Ford's warranty extension 19N07 covers replacing the gearbox module when it is the cause, which is common here. Clutch B can then no longer be controlled safely.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 7A

Possible causes

  • Gearbox module faulty internally (motor driver) high
  • Water or corrosion at the gearbox module connector medium
  • Clutch B motor or its wiring faulty medium
  • Weak supply to the gearbox module low

Symptoms

  • MIL or transmission warning on
  • Jerky take-off or shifts
  • Reverse or even gears missing, limp mode

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P087A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication