P0875
Transmission Fluid Pressure Sensor/Switch D Circuit
Transmission fluid pressure switches C and D report whether a clutch circuit is pressurised. They are more widespread than A and B: GM's 6L80/6L90 and 6T40/6T70 six-speeds put switch C on the 2-6 brake and D on the 1-2-3-4 clutch, Allison uses them for its third shift valve and its reverse switch, Ram's RFE gearboxes for the clutch pressure switches in the solenoid block. Ford reports pressure faults under its solenoid codes. P0875 is the general fault of D. Allison's 2006 table uses it for the reverse pressure switch: it reports reverse while the range sensor shows P, N or a forward range for over 1 s, type A. Nissan's Kicks and Versa CVT reports the high clutch switch of the auxiliary gearbox as 'sensor/switch D'; together with P285A the control valve body is replaced.
Possible causes
- Control valve body with pressure switch faulty (Nissan CVT) high
- Reverse pressure switch stuck closed (Allison) medium
- Range sensor misadjusted medium
- Wiring or connector low
Symptoms
- MIL or transmission warning lamp on
- Judder or reduced power (Nissan)
- Reverse indication or shifting disturbed (Allison)
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0875
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.