OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0871

Transmission Fluid Pressure Sensor/Switch C Circuit Range/Performance

Transmission fluid pressure switches C and D report whether a clutch circuit is pressurised. They are more widespread than A and B: GM's 6L80/6L90 and 6T40/6T70 six-speeds put switch C on the 2-6 brake and D on the 1-2-3-4 clutch, Allison uses them for its third shift valve and its reverse switch, Ram's RFE gearboxes for the clutch pressure switches in the solenoid block. Ford reports pressure faults under its solenoid codes. P0871 means the switch does not follow the command or gear. On Ram's RFE it is the overdrive clutch switch: open in gears 1 to 3, closed in 4 to 6; it closes at about 1.5 bar and opens at 0.75 bar. Sonnax blames worn valve body bores in about 90 % of cases; on 2024 trucks it came with P0868 from a broken rear thrust washer. Allison 2006: switch without pressure 5 s after command, type A.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 71

Possible causes

  • Worn valve body bores or shift valve plugs high
  • Mechanical damage: thrust washer, clutch seals medium
  • Pressure switch faulty (lip seal) medium
  • Dirt or sticking valve (dual clutch) medium

Symptoms

  • MIL or transmission warning lamp on
  • Limp mode, often in 2nd or 3rd gear
  • Harsh engagement, neutral feeling in 4th gear

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0871

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication