P0869
Transmission Fluid Pressure High
P0867 to P0869 cover the system or line pressure of the gearbox as a whole: a pressure sensor measures it and the control module compares it with the pressure it commands. Faults of the sensor circuit itself have their own codes (Chrysler 68RFE P0932 ff), the single switches A to H have theirs (P0840 ff). Thresholds are not published; the codes are documented in bulletins for the Ram 68RFE and for the Tremec dual clutch of Corvette C8 and Maserati MC20. P0869 means the measured pressure stays above target. Chrysler lists 'Line Pressure High' among the 68RFE codes fixed by control module updates; on the Corvette and Maserati dual clutch a valve stuck in the high-pressure position is the usual cause, cured by cleaning or a new control unit. Harsh engagement is the typical sign.
Possible causes
- Pressure control valve or solenoid stuck from dirt high
- Software or calibration medium
- Line pressure sensor reading high medium
- Pressure control solenoid without power, gearbox falls back to maximum pressure low
Symptoms
- Transmission warning lamp or MIL on
- Harsh shifts and engagement shocks
- Limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0869
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 5 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.