P0867
Transmission Fluid Pressure
P0867 to P0869 cover the system or line pressure of the gearbox as a whole: a pressure sensor measures it and the control module compares it with the pressure it commands. Faults of the sensor circuit itself have their own codes (Chrysler 68RFE P0932 ff), the single switches A to H have theirs (P0840 ff). Thresholds are not published; the codes are documented in bulletins for the Ram 68RFE and for the Tremec dual clutch of Corvette C8 and Maserati MC20. P0867 is the general pressure fault. GM's Corvette bulletin reads it as 'no system pressure': the pump delivers nothing or the fluid is almost gone, so valve cleaning is pointless and the gearbox needs a mechanical check. The car may lose drive completely.
Possible causes
- Fluid level extremely low or leak high
- Fluid pump or its drive faulty medium
- Pressure regulator or relief valve sticking medium
- System pressure sensor faulty low
Symptoms
- Transmission warning lamp or MIL on
- Weak or no drive
- Limp mode, car may be stranded
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0867
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 5 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.