P0863
TCM Communication Circuit
The TCM communication circuit is a direct link between gearbox and engine module outside the CAN bus. Subaru's 2005 WRX, sold as Saab 9-2X, uses a single 'AT diagnosis' wire: about once a second the gearbox module sends a frame with a start pulse of 40 ms low and 20 ms high, carrying among other things its request for the MIL. On CAN cars, loss of the gearbox module sets U0101 or U0402 instead. P0863 is the general fault of this link without telling range, low or high apart. No maker documents it on its own. Without the link the engine module receives no gearbox status, and a MIL request from the gearbox gets lost.
Possible causes
- Wire or connector between engine and gearbox module open or corroded high
- Gearbox module without power or ground medium
- Gearbox module faulty medium
- Input of the engine module faulty low
Symptoms
- Check engine lamp on
- Gearbox warning or limp mode possible
- Gearbox faults not passed to the engine module
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0863
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- saabwisonline.com/9-2x-9346/2005/0-general/general-diagnostics-2-0t/diagnostic-trouble-code-dtc-detecting-criteria/fault-diagnosis-fault-codes/dtc-p0865-tcm-communication-circuit-low
- saabwisonline.com/9-2x-9346/2005/0-general/general-diagnostics-2-0t/diagnostic-trouble-code-dtc-detecting-criteria/fault-diagnosis-fault-codes/dtc-p0864-tcm-communication-circuit-range-performance