P085D
Gear Shift Control Module A Performance
Gear shift control modules A and B are selector modules of shift-by-wire systems, such as Audi's selector lever J587 or Stellantis' rotary shift module. The codes cover a dedicated link to the gearbox module and the module's plausibility. If the selected range cannot be transferred reliably, the gearbox holds its range, goes to P at standstill or into limp mode. Modules on CAN report lost communication as U0103 or invalid data as U0404 instead; GM uses its own codes. P085D means communication works, but the data or status of module A are implausible. Audi documents it on the 2019–21 A6/A7 family: the gearbox module stores P085D when the selector lever reports position sensor or P-button faults; drivers see a selector warning and cannot select a range. A software update of the lever fixes its over-sensitive voltage evaluation.
Possible causes
- Selector module software (Audi update J587) high
- Selector module faulty: position sensor, P button medium
- Supply voltage dips at the module medium
- Connector or wiring at the lever low
Symptoms
- Selector lever fault shown in the cluster
- No range selectable, car stays in P
- Gearbox limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P085D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.