P085C
Gear Shift Control Module B Communication Circuit High
Gear shift control modules A and B are selector modules of shift-by-wire systems, such as Audi's selector lever J587 or Stellantis' rotary shift module. The codes cover a dedicated link to the gearbox module and the module's plausibility. If the selected range cannot be transferred reliably, the gearbox holds its range, goes to P at standstill or into limp mode. Modules on CAN report lost communication as U0103 or invalid data as U0404 instead; GM uses its own codes. P085C means the link to module B stays at a high level: a short to voltage, or an open line held high by the receiver's pull-up. No maker documents it.
Possible causes
- Communication line shorted to voltage high
- Open line with pull-up in the receiver medium
- Software of selector or gearbox module medium
- Selector module faulty medium
Symptoms
- Selector or gearbox warning in the instrument cluster
- Range cannot be selected or only with delay, car stays in P/N
- Gearbox limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P085C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.