OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P085B

Gear Shift Control Module B Communication Circuit Low

Gear shift control modules A and B are selector modules of shift-by-wire systems, such as Audi's selector lever J587 or Stellantis' rotary shift module. The codes cover a dedicated link to the gearbox module and the module's plausibility. If the selected range cannot be transferred reliably, the gearbox holds its range, goes to P at standstill or into limp mode. Modules on CAN report lost communication as U0103 or invalid data as U0404 instead; GM uses its own codes. P085B means the link to module B stays at a low level, typically a short to ground or a sender that no longer releases the line. No maker documents it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 5B

Possible causes

  • Communication line shorted to ground high
  • Power or ground of the selector module medium
  • Software of selector or gearbox module medium
  • Selector module faulty medium

Symptoms

  • Selector or gearbox warning in the instrument cluster
  • Range cannot be selected or only with delay, car stays in P/N
  • Gearbox limp mode

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P085B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication