P0855
Drive Switch Input Circuit High
The drive switch input reports to the engine or gearbox module that range D is selected, usually through its own contact in the range switch or selector next to the park/neutral contact. No maker documents these codes; GM's tables up to 2025, Ford's summaries and Saab service data were searched. The description follows California's rule for inputs, circuit and plausibility checks, and the documented park/neutral input, which is checked against the gearbox module's range. P0855 means the D signal stays at a high level: an open wire with the pull-up lifting the input, a short to voltage or a contact that no longer closes.
Possible causes
- Signal or ground wire open high
- Contact worn or misadjusted, does not close medium
- Short to voltage low
Symptoms
- Fault stored, MIL depending on maker
- Gear indicator wrong
- Cruise control not working
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0855
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.