P0853
Drive Switch Input Circuit
The drive switch input reports to the engine or gearbox module that range D is selected, usually through its own contact in the range switch or selector next to the park/neutral contact. No maker documents these codes; GM's tables up to 2025, Ford's summaries and Saab service data were searched. The description follows California's rule for inputs, circuit and plausibility checks, and the documented park/neutral input, which is checked against the gearbox module's range. P0853 is the general circuit or plausibility fault without telling low from high.
Possible causes
- Range switch or D contact faulty or misadjusted high
- Wire or connector open or corroded medium
- Selector cable misadjusted medium
- Module input or software low
Symptoms
- Fault stored, MIL depending on maker
- Gear indicator wrong
- Cruise control not working
- Gearbox emergency program possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0853
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- saabwisonline.com/9-4x/2011/4-transmission/automatic-transmission-6t70-6t75/fault-diagnosis-diagnostic-trouble-codes/dtc-p0850-p0852
- saabwisonline.com/9-2x-9346/2005/0-general/general-diagnostics-2-5i/diagnostic-trouble-code-dtc-detecting-criteria/fault-diagnosis-fault-codes/dtc-p0851-neutral-switch-input-circuit-low-at-model