OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P084F

Park/Neutral Switch Output Circuit

P084F concerns an output: a gearbox, hybrid or selector module passes the park/neutral status as a switched signal to other modules, for example for start release. The module watches its own driver for open circuits and shorts. Stellantis names the code for the 2019 Pacifica plug-in hybrid, where it came with a software fault that drained the 12 V battery; a hybrid control update fixes it. Saab's gearbox module reports the same kind of P/N output to the engine module under P081A/P081B. Strategy and MIL status are not published.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 4F

Possible causes

  • P/N output line or connector open or shorted high
  • Module software misjudging the output medium
  • Output driver in the module faulty low
  • Receiving module pulls the line wrongly low

Symptoms

  • Engine or ready mode does not start in P/N
  • 12 V battery drains while parked
  • Warning about gear or park position

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P084F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication