P084E
Transmission Fluid Pressure Sensor/Switch H Circuit Intermittent
Transmission fluid pressure sensor/switch H is the last of up to eight pressure inputs (A to H) in SAE J2012; the letter is the maker's choice. Documented uses are rare: Mitsubishi sets P084A on its Jatco CVT8 (F1CJC/W1CJC) and Ford P084B on the 2020–23 Explorer 3.3 full hybrid. For P084E no maker is documented. It reports short dropouts or jumps of the H signal without a lasting low or high, typically from a loose contact or corrosion at the gearbox connector.
Possible causes
- Loose contact or corrosion at the gearbox connector high
- Chafed spot in the harness medium
- Dirt at sensor or valve causing signal jumps medium
- Sensor faulty internally low
Symptoms
- Warning lamp coming and going
- Occasional shift shocks
- Brief limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P084E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.