P0849
Transmission Fluid Pressure Sensor/Switch B Circuit Intermittent
Transmission fluid pressure sensor/switch A and B are inputs inside the automatic gearbox. A switch only reports pressure present or absent, a sensor reports a value. The letter is the maker's choice: Allison 1000 uses A and B for the switches on shift valves S1 and S2, GM's CVT for the primary and secondary pulley sensors, GM's 2025 8-speed A for the lube pressure sensor; Ford reports pressure faults under its solenoid codes instead. P0849 reports short dropouts of the B signal. GM bulletin 21-NA-033 for the Corvette C8 dual clutch lists it with P0841, P0844 and P0846: first the valves are cleaned and the clutches relearned, and only if the code comes back on its own is the circuit traced. Like the A counterpart P0844 it has no published thresholds.
Possible causes
- Loose contact or corrosion at the gearbox connector or control unit high
- Dirt in valve or sensor causing signal jumps medium
- Sensor faulty internally medium
- Chafed spot in the harness low
Symptoms
- Warning lamp coming and going
- Occasional shift shocks
- Brief limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0849
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.