OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0844

Transmission Fluid Pressure Sensor/Switch A Circuit Intermittent

Transmission fluid pressure sensor/switch A and B are inputs inside the automatic gearbox. A switch only reports pressure present or absent, a sensor reports a value. The letter is the maker's choice: Allison 1000 uses A and B for the switches on shift valves S1 and S2, GM's CVT for the primary and secondary pulley sensors, GM's 2025 8-speed A for the lube pressure sensor; Ford reports pressure faults under its solenoid codes instead. P0844 reports short dropouts or jumps of the signal without a lasting low or high. GM documents it in bulletin 21-NA-033 for the Corvette C8 dual clutch, together with P0841, P0846 and P0849: often a sticking valve is the cause, so the valve body is flushed and a fast learn run; if the code returns alone, the circuit is checked. Thresholds are not published.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 44

Possible causes

  • Loose contact or corrosion at the gearbox connector or control unit high
  • Dirt in valve or sensor causing signal jumps medium
  • Sensor faulty internally medium
  • Chafed spot in the harness low

Symptoms

  • Warning lamp coming and going
  • Occasional shift shocks
  • Brief limp mode

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0844

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication