P083F
Clutch Pedal Switch A/B Correlation
Manual cars often carry two clutch pedal switches: one near the top of the pedal travel for cruise control and start-stop, one near the floor that releases the starter. Pressing the pedal must switch them in a sensible order; P083F means their states contradict each other. Stellantis documents it for the 2025 Jeep Wrangler manual: the engine does not crank and start-stop is blocked, caused by corroded contacts in the clutch interlock switch, which is replaced. Ford checks the same pair over more than 40 pedal applications but reports it as P0704, without MIL.
Possible causes
- One clutch switch faulty or corroded high
- Switch misadjusted or not seated after clutch or pedal work medium
- Open circuit or contact resistance in harness or connector medium
- Pedal does not fully return (stop, hydraulics) low
Symptoms
- Start-stop not working
- Engine does not crank although the clutch is pressed
- Cruise control cannot be set
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P083F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.