P083E
Transmission Fluid Pressure Sensor/Switch G Circuit Intermittent
Transmission fluid pressure sensor/switch G is one of up to eight pressure inputs (A to H) that SAE J2012 provides for automatic gearboxes. No maker could be found that uses the letter G: GM's tables up to 2025, Ford's summaries and Allison stop at A to E. The description therefore follows the general rule for gearbox inputs in California's OBD regulation, which demands circuit and plausibility checks, and the logic of the A and B codes. P083E reports short dropouts or signal jumps without a lasting low or high, typically from a loose contact at the gearbox connector.
Possible causes
- Loose contact or corrosion at the gearbox connector high
- Chafed spot in the harness medium
- Dirt at sensor or valve causing signal jumps medium
- Sensor faulty internally low
Symptoms
- Warning lamp coming and going
- Occasional shift shocks
- Brief limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P083E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.