OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P083B

Transmission Fluid Pressure Sensor/Switch G Circuit Range/Performance

Transmission fluid pressure sensor/switch G is one of up to eight pressure inputs (A to H) that SAE J2012 provides for automatic gearboxes. No maker could be found that uses the letter G: GM's tables up to 2025, Ford's summaries and Allison stop at A to E. The description therefore follows the general rule for gearbox inputs in California's OBD regulation, which demands circuit and plausibility checks, and the logic of the A and B codes. P083B means the signal is electrically valid but implausible: a switch does not follow the valve or clutch command, or a sensor deviates from target or from a partner sensor, as GM's CVT checks on A and B.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 3B

Possible causes

  • Dirty or worn valve body, sticking valve high
  • Pressure sensor or switch drifting high
  • Mechanical damage: CVT belt or pulleys, pump, clutch medium
  • Fluid level low or fluid aged medium
  • Control module software thresholds low

Symptoms

  • Check engine or transmission warning lamp on
  • Limp mode with substitute gear or limited ratio
  • Harsh or delayed shifts

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P083B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication