OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0830

Clutch Pedal Switch A Circuit

Clutch pedal switches A and B are digital inputs of manual gearboxes: they release the starter only with the pedal pressed, switch off cruise control and tell start-stop whether the clutch is open. Which switch is A or B is up to each manufacturer – FCA calls the pedal-up switch A. Ford's 2020–23 summary checks a dual switch over more than 40 pedal applications and reports a stuck switch without MIL (P0830 stuck high, P0833 stuck low, comparison P0704). P0830 is the general fault of switch A. On Ford it means the switch is stuck high. On a 2012–13 Jeep Wrangler with the six-speed manual, Chrysler reprogrammed the engine module for unwanted cruise control cut-outs with P0830; an FCA tip notes that a driver resting a foot on the pedal keeps the pedal-up switch on and sets the code. The MIL depends on the manufacturer.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 30

Possible causes

  • Switch faulty or misadjusted high
  • Foot resting on the clutch pedal keeps the switch actuated medium
  • Software misjudgment (reprogramming) medium
  • Wiring, connector or remote-start bypass low

Symptoms

  • Cruise control switches off or cannot be activated
  • Start-stop disabled
  • Engine may not crank (starter interlock)

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0830

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication