OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0829

5-6 Shift

Shift codes check the gear change itself: the module compares the commanded change with the speed trace and flags a shift that takes too long, does not happen, flares or binds up two clutches. P0829 covers the change between 5th and 6th gear in either direction; J2012 placed it here because P0785 ff were already taken, between P0781 '1-2 Shift' to P0784 '4-5 Shift' and P07DA/P07DB for 6-7 and 7-8. No manufacturer document available to us uses it: Ford's Diesel summary checks shift completion without a gear-specific code (speed must drop by more than 30 rpm on an upshift, flare above 300 rpm), Ford's automatics feed the solenoid function codes and GM the clutch valve codes. It exists only on transmissions with at least six gears; MIL and trip count follow the manufacturer.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 29

Possible causes

  • Fluid low or aged high
  • Shift or clutch pressure valve for 5-6 sticking medium
  • Clutch or brake of 6th gear worn medium
  • Adaptives or software medium
  • Input or output speed sensor delivering wrong values low

Symptoms

  • Harsh, delayed or missing 5-6 shift
  • Engine speed flares during the shift
  • Limp mode in a fixed gear, possibly MIL

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0829

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication