P0820
Gear Lever X-Y Position Sensor Circuit
Gear lever X and Y position sensors detect a selector's position in two directions: on an H-gate shift and select direction (a LuK patent uses two sensors about 90° apart), on a shift-by-wire lever its two axes. P0820 covers the whole X-Y circuit, P0821–P0824 and P082A–P082F sensor 1, P089A–P08A3 a redundant sensor 2. P0820 is the umbrella code: the module does not tell X from Y, or sees an invalid combination of both axes that matches no gate position. The only documented user is Mitsubishi's 2022 Outlander PHEV, which names it 'shift lever position (main) circuit malfunction' and sets it for an impossible lever position, without published thresholds. GM reads its X/Y sensors under P082A–P082F instead. Range selection may be blocked and the vehicle stays in P or N.
Possible causes
- Wire or connector between selector and module open or shorted high
- Position sensor in the selector assembly faulty high
- Sensor supply (5 V reference) or ground faulty medium
- Transmission, hybrid or selector module low
Symptoms
- Range cannot be selected or only partly
- Vehicle stays in P or N, or limp mode
- Transmission warning, range display flashes or missing
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0820
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.