OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P081E

Excessive Clutch B Slippage

P081E is the counterpart to P0811 for clutch B – on a dual-clutch gearbox clutch 2 with the even gears and reverse, which Audi calls 'clutch 2'. The module compares engine speed with the input shaft speed of the closed clutch and flags slip above its limit. Audi's DL382 S tronic (2020–24) sets it intermittently with P0811 and input speed codes; the bulletins report a transmission malfunction and 'reverse gear unavailable', and the fix was a new transmission module with improved parts from late 2023. A failed clutch 2 typically means no reverse and no even gears.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 1E

Possible causes

  • Transmission module speed capture faulty high
  • Clutch 2 worn or overheated medium
  • Fluid or pressure medium
  • Input speed sensor B faulty low

Symptoms

  • Transmission warning, limp mode
  • Reverse or even gears not available
  • Engine flares on gear changes

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P081E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication