P081D
Neutral Input Circuit
P081D concerns the input 'neutral' – the N contact of the selector or range switch, on manual cars a neutral switch or sensor for start-stop. Neutral serves for starter release, idle control without load, start-stop release and enabling other diagnostics. The check would be a circuit or plausibility test against the range sensor or speed ratio. No manufacturer document available to us uses P081D; its sister P081C is documented on the Jeep Compass, and Saab's range switch shows that P and N are the two start positions. The engine may then not start in N, start-stop is disabled and idle diagnostics may be suspended.
Possible causes
- Neutral contact, range switch or neutral sensor faulty or misadjusted high
- Selector or shift cable misadjusted medium
- Wire or connector medium
- Control module or software low
Symptoms
- Engine does not start in N (only in P)
- Start-stop not working
- Range display does not show N
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P081D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.