P081A
Starter Disable Circuit Low
The starter disable line carries the signal 'park or neutral – start allowed' from the transmission module, or its built-in range switch, to the body or engine module, which only then releases the starter. On Saab's 2010 9-5 automatic the line is open in a drive range (0 V at the body module) and closed in P or N (12 V). P081A means the start release line is too low – the output is shorted to ground or open. Saab's 2012 9-3 transmission module checks it in D, where the output must have a defined state, with 9–18 V, not in limp mode and continuously; no time threshold is published. Because the engine module then sees no 'P/N', the engine may not start.
Possible causes
- P/N line to the engine module shorted to ground high
- Line or connector open high
- Connector oxidized or pins pushed back medium
- Transmission module output stage faulty low
Symptoms
- Engine does not start or only sometimes
- Starter does not crank in P or N
- No check engine lamp
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P081A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.