OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0816

Downshift Switch Circuit

Tap-up and tap-down switches let the driver choose gears on an automatic (selector gate, buttons or paddles). GM, Ford and Saab all treat a shift request that appears where it is impossible – in park or neutral, at Ford also reverse – or that stays on implausibly long as a stuck switch. P0816 is the mirror of P0815 for the downshift switch. GM's 2025 table sets it when 'tap down' stays on for more than 1 s (100 ms raster, over 9 V), the 2018 hybrid table after 2 s in P/N or 655 s in drive, type C without MIL; Saab's 9-4X after 1 s in P/N or 10 minutes in a drive range; Ford's SelectShift when the switch is closed in P, R or N, without MIL. On selectors with a resistor network a short to positive in the downshift branch sets P0816. Manual shifting is disabled, automatic operation stays normal.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 16

Possible causes

  • Downshift switch or paddle sticking or faulty high
  • Signal wire shorted to positive medium
  • Selector assembly faulty medium
  • Body or transmission module low

Symptoms

  • Manual down shifting not working
  • Transmission stays in the normal automatic mode
  • No check engine lamp

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0816

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication