OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0814

Transmission Range Display Circuit

P0814 concerns the drive or data circuit of the range display – the PRNDL or PRNDM display or lighting on the selector, sometimes in the instrument cluster. It is documented on the 2017–22 Jeep Compass with the nine-speed automatic: the electronic shift module stores P0814 with the MIL on, the selector lighting flickers or goes dark, and in a 2020 bulletin the lever could be moved out of park during cranking so that the engine stalled. The cause was software in the shift module, fixed by reflashing; a 2022 bulletin adds P081C. A wrong or missing range display matters for safety because the driver cannot reliably see P, R or N. No thresholds are published.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 14

Possible causes

  • Shift module software (Jeep Compass) high
  • Connector or wire to the selector display or cluster medium
  • Display LED or selector module faulty medium
  • Range sensor or transmission module delivering an invalid range low

Symptoms

  • Range display on the selector flickers or stays dark
  • Check engine lamp (Jeep)
  • Lever can leave P during cranking, engine stalls (Jeep)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0814

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication