P0813
Reverse Output Circuit
P0813 concerns a signal 'reverse active' that a module puts out – usually the transmission module, on manual cars the engine or body module – for example to the back-up lamp relay, the reversing camera or the body module. Like other driver outputs it is checked by comparing commanded and actual state, which reveals an open circuit or a short. Saab's 2012 transmission module reports a short to positive on its park/neutral output in the same way. No manufacturer document with thresholds for the reverse output is available to us. Back-up lamps, camera or mirror tilt may stop working; driving itself is not affected, and CARB allows such outputs without the MIL.
Possible causes
- Wire from module to relay or body module open or shorted high
- Back-up lamp relay or connected load faulty medium
- Connector corroded medium
- Module output stage faulty low
Symptoms
- Back-up lamps not working
- Reversing camera or parking beeper does not activate
- Stored code without driving effects
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0813
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.