OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0809

Clutch Position Sensor A Circuit Intermittent

The 'Clutch Position Sensor A' family (P0805 circuit to P0809, P080A not learned) means different parts by vehicle generation. GM used P0806–P080A until model year 2018 for the analog clutch pedal sensor of its manual cars, then the newer pedal sensor codes P08A8 ff; Saab's 2012 9-3 does the same. Ford's DPS6 dual clutch uses the family for the electric motor of clutch A. P0809 is documented only for Ford's DPS6 (Fiesta from 2011, Focus from 2012): the motor that operates clutch A carries three Hall sensors, one per phase, and while the motor turns they must produce a fixed sequence; a wrong sequence sets the code. The clutch B counterpart is P087E. The module then loses confidence in the clutch position, so clutch A with the odd gears 1, 3 and 5 is restricted. GM and Saab do not use P0809; Ford publishes no thresholds.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 09

Possible causes

  • Clutch A actuator motor or its Hall sensors faulty high
  • Loose contact at the actuator connector medium
  • Transmission module Hall evaluation faulty low
  • Supply voltage dips low

Symptoms

  • Check engine lamp on
  • Jerky or judder take-off
  • Limp mode, odd gears missing

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0809

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication