P0805
Clutch Position Sensor A Circuit
The J2012 family 'Clutch Position Sensor A' (P0805 circuit, P0806 range/performance, P0807 low, P0808 high, P0809 intermittent, P080A not learned) covers the position of a clutch – the pedal of a manual gearbox, the clutch actuator of an automated or dual-clutch gearbox, or a clutch inside an automatic. P0805 is the general circuit fault. Uses differ: Nissan's 2022 Pathfinder with its nine-speed automatic stores it in the transmission module, lights the MIL and disables idle stop ('Idle Stop System Fault'), fixed with new software. Ford's DPS6 dual-clutch gearbox uses it for the module-internal chip that drives the clutch A motor, so a control unit fault rather than an outside sensor. GM reads its clutch pedal sensor under P0806–P0808 only.
Possible causes
- Clutch position sensor faulty (pedal or actuator) high
- Connector or harness open, corroded or shorted medium
- Transmission module software (Nissan) medium
- Control unit internal fault (Ford DPS6: clutch motor driver) medium
Symptoms
- Check engine lamp on
- Idle stop disabled ('Idle Stop System Fault')
- Jerky driving or harsh clutch engagement (dual clutch)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0805
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.