OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0801

Reverse Inhibit Control Circuit/Open

On GM manual gearboxes (Tremec T56/TR6060 in Corvette, Camaro, CTS-V and ATS-V) the engine module drives a solenoid that blocks reverse while the car moves forward. P0801 means its control circuit is open. GM's tables describe the check: the low-side driver's internal diagnosis flags an open line with at least 9 V and the engine above 250 rpm, 20 failures in 25 samples of 250 ms – about 6 s; in 2006 a 5 s comparison of commanded and actual driver state. GM rates it type C, emissions-neutral and without MIL, from 2019 with a 'service vehicle soon' note. Depending on how it fails, reverse cannot be engaged or is no longer blocked. The title was updated to the current J2012 wording with '/Open'.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number8 / 01

Possible causes

  • Connector at the reverse inhibit solenoid loose or corroded high
  • Solenoid coil open medium
  • Harness between engine module and gearbox damaged medium
  • Engine module driver faulty low

Symptoms

  • Reverse hard or impossible to engage
  • Reverse no longer blocked
  • Service note in the driver display, usually no MIL

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0801

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication