OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P07F8

Stuck in Gear 9

P07F8 means gear 9 cannot be disengaged: the transmission stays in 9th despite the command to leave it. No manufacturer document available to us uses it. The family is documented only for 8th gear on eight-speed dual-clutch gearboxes (Maserati MC20: P07D7 and P07D8; Corvette 2020–23: P07D8), where hydraulic actuators move shift forks under position monitoring. Nine- and ten-speed planetary automatics from Ford, GM and Nissan report faults in 9th gear as a ratio code (P07F6) or through solenoid and clutch valve codes. The description follows the J2012 scheme and CARB's functional check of transmission outputs.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / F8

Possible causes

  • Shift fork actuator or shift valve sticking (contamination) high
  • System pressure low or unstable (mechatronic pressure valve) medium
  • Shift fork, synchronizer or gear damaged medium
  • Fluid or filter contaminated low

Symptoms

  • Transmission stays in gear 9 and will not downshift
  • Weak take-off after stopping
  • Transmission warning, limp mode

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P07F8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication