OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P07F4

Transmission Range Control Module Communication Circuit High

The transmission range control module is the separate shift-by-wire control unit that reads the selector and drives the range actuator. P07F4 is the electrical high check of its communication line: the line is shorted to the supply and stays at a high level. No manufacturer document available to us uses it; as with P07F3 it fits a dedicated signal or redundancy line rather than a CAN bus, whose faults GM reports under its own U codes. The module may block range changes or select neutral.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / F4

Possible causes

  • Communication wire shorted to the supply medium
  • Module faulty low
  • Connector fault low

Symptoms

  • Shift warning
  • Possible shift lock or neutral (depends on manufacturer)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P07F4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication