P07F2
Transmission Range Control Module Communication Circuit
The transmission range control module is the separate shift-by-wire control unit that reads the selector and drives the range actuator. P07F2 reports a fault in its communication. Mitsubishi's 2022 CVT with electric shift sets it when the module's start-up CAN check fails and blames the module itself; it switches to neutral only if the CVT or the whole system is affected too, and one of its two entries carries no MIL. GM (U18AA, U2409) and Ford (U101F, without MIL) report the same function under their own U codes.
Possible causes
- Shift-by-wire module faulty or its software high
- Communication wire or connector medium
- Weak battery during start-up low
Symptoms
- Shift warning
- Usually no restriction; neutral if the transmission is affected too
- U codes in other modules possible
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P07F2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- mitsubishitechinfo.com/data/DG/2022/04/HTML/N5040201C000B900USA.htm
- mitsubishitechinfo.com/data/DG/2022/04/HTML/N5040201F0000600USA.htm
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG03B Diagnostics.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- law.cornell.edu/regulations/california/13-CCR-1968.2