OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P07F1

Input/Turbine Shaft Speed Sensor C Circuit

P07F1 is the general circuit code of a third input or turbine shaft speed sensor, after sensor A (P0715) and B (P2765); low and high for sensor C are P07C3 and P07C4. No production use could be found in GM tables from 2015 to 2025, Ford's summaries of 2012 and 2020–23, Mitsubishi's code index or manufacturer bulletins; such a sensor would make sense on transmissions with three input shafts or a hybrid input. The check would follow P0715: no plausible signal while driving or an open circuit. The module then uses a substitute value, keeps the converter clutch open and shifts more harshly; with emissions impact CARB requires the MIL.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / F1

Possible causes

  • Sensor wire or connector open medium
  • Speed sensor faulty medium
  • Control module or software low

Symptoms

  • Check engine lamp (expected)
  • Harsh shifts, converter clutch stays open
  • Limp mode possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P07F1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication