P07ED
Transmission Range Multi-Function Select Circuit Stuck
'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. Mitsubishi's 2022 CVT with electric shift uses eight sensors (R: 1–2 on, N toward R: 1–5, home: all, N toward D: 4–8, D/M: 7–8). P07ED is the step after P07EC: at least two bits are stuck, so the position can no longer be decoded reliably. Mitsubishi then puts the drive in neutral and blocks changes between P, R, N and D, lights the MIL and the red or yellow shift warning; the car cannot be driven and has to be towed.
Possible causes
- Selector sensor board faulty high
- Selector connector corroded or loose (several pins) medium
- Liquid spilled into the center console low
Symptoms
- No range can be selected, vehicle in neutral
- MIL and red or yellow shift warning
- Vehicle cannot be driven (tow)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P07ED
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.