P07EC
Transmission Range Multi-Function Select Circuit
'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. Mitsubishi's 2022 CVT with electric shift uses eight sensors (R: 1–2 on, N toward R: 1–5, home: all, N toward D: 4–8, D/M: 7–8). P07EC sets when a single bit does not change as the lever moves through its positions – it is stuck on or off. The other bits still identify the position, but the decision takes at least a second. Mitsubishi shows only the yellow electric-shift warning, without the MIL. Two or more stuck bits are P07ED.
Possible causes
- One position sensor in the selector faulty high
- One sensor wire open or shorted medium
- Dirt or sticking mechanism in the selector low
Symptoms
- Yellow shift warning or message
- Selected range taken over with a delay of a second or more
- No MIL (Mitsubishi)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P07EC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.