P07EB
Transmission Range Control A Circuit High
Despite its name, 'Transmission Range Control A' is not the range actuator motor – that has its own codes, P272A and P272B – but the sensor circuits of an electric shift-by-wire selector. The only documented user is Mitsubishi's 2022 service manual for a CVT with electric shift (very likely the 2022–23 Outlander): the lever carries eight position sensors whose on/off pattern encodes R, N, home, D and M. P07EB is the electrical high check: one sensor reads above 4.5 V for 2.4 s, a signal wire shorted to the supply. Mitsubishi uses the same threshold as for the open circuit P07E8 and separates the two only in its list of causes; there is no fail-safe reaction.
Possible causes
- Signal wire shorted to 5 V or 12 V supply high
- Selector faulty internally medium
- Shift module low
Symptoms
- Electric shift or check engine warning
- Usually no noticeable restriction
- Further sensor faults lead to P07EC/P07ED
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P07EB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.