P07E9
Transmission Range Control A Circuit Performance
Despite its name, 'Transmission Range Control A' is not the range actuator motor – that has its own codes, P272A and P272B – but the sensor circuits of an electric shift-by-wire selector. The only documented user is Mitsubishi's 2022 service manual for a CVT with electric shift (very likely the 2022–23 Outlander): the lever carries eight position sensors whose on/off pattern encodes R, N, home, D and M. P07E9 is the plausibility check of the sensor voltage: valid levels lie only in defined on and off windows, and a sensor sitting for 2.4 s in a forbidden band in between (0.6–1.07, 2.12–2.67 or 3.28–4.5 V) sets it – typically contact resistance, moisture or a sensor beginning to fail. Mitsubishi defines no fail-safe reaction. Note the title: 'Circuit Performance', not 'Range/Performance'.
Possible causes
- Corroded or damp connector, contact resistance high
- Position sensor drifting medium
- Shift module input low
Symptoms
- Electric shift or check engine warning
- Usually no noticeable restriction
- Further sensor faults lead to P07EC/P07ED
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P07E9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.