P07DB
7-8 Shift
Shift codes check the gear change itself: the module compares the commanded change with the speed trace and flags a shift that takes too long, does not happen, flares or binds up two clutches. They continue the series P0781 '1-2 Shift' to P0784 '4-5 Shift'. No manufacturer document available to us uses P07DA or P07DB: Ford's Diesel summary checks shift completion (speed must drop by more than 30 rpm on an upshift, flare above 300 rpm) without a gear-specific code, Ford's 10R80 feeds the solenoid function codes and GM the clutch valve codes. P07DB names the change between 7th and 8th gear, in either direction, as faulty; it exists only on transmissions with eight or more gears. Flags and thresholds follow the manufacturer's own logic.
Possible causes
- Shift or clutch valve sticking medium
- Worn clutch or hydraulic leak on the clutches involved medium
- Shift adaptives wrong medium
- Fluid level or condition low
Symptoms
- Harsh, delayed or missing 7-8 shift
- Engine speed flares during the shift
- Transmission warning, possibly MIL
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P07DB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.