OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P07D9

Gear 8 Incorrect Ratio

A ratio code compares input or turbine speed divided by output speed with the ratio of the commanded gear; a slipping clutch or the wrong gear trips it. Ford's summaries describe the check (over 30 rpm off for more than 1.8 s, three times) for gears 1–6 only; its 10-speed bulletins show gears 7–10 as P076F, P07D9, P07F6 and P07F7. P07D9 covers 8th gear. Ford's 10R80 (F-150, Mustang, Ranger, Expedition and others) and 10R140 (2020 Super Duty) list it in bulletins on harsh or delayed shifts, caused by adaptive learning, sticking valve-body valves or a migrating sleeve in a clutch cylinder. Nissan's nine-speed Frontier and Titan set it with the MIL on; a Stellantis bulletin pairs it with P0731 on low-mileage vehicles with wrong factory adaptives. Hyundai's eight-speeds and GM's 10-speed do not use it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / D9

Possible causes

  • Clutch slipping or hydraulic leak (Ford 10R: migrating sleeve in the CDF clutch cylinder) high
  • Shift adaptives wrong or not learned high
  • Sticking valve in the valve body medium
  • Fluid level low or fluid degraded medium
  • Turbine or output speed sensor signal wrong low

Symptoms

  • Slipping or flaring engine speed in gear 8
  • Harsh or delayed shifts
  • Check engine or transmission warning lamp
  • Gear 8 locked out, higher rpm at cruise

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P07D9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication