OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P07D8

Unable to Engage Gear 8

'Unable to Engage' means the transmission does not reach the commanded gear – here 8th. Documented users are eight-speed dual-clutch gearboxes with hydraulically moved, position-monitored shift forks. A GM bulletin for the 2020–23 Corvette lists it with the MIL on, caused by a solenoid or internal switch sticking from debris: valve cleaning is only advised when system pressure codes are present as well, otherwise a service fast-learn; if that fails, the mechanics are damaged. Maserati's MC20 lists it with a pressure check of 20–30 bar. On a dual-clutch box the half carrying the even gears may be locked out. No published thresholds or trip counts.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / D8

Possible causes

  • Sticking solenoid or shift valve in the mechatronic unit high
  • System pressure too low or unstable medium
  • Adaptives lost or wrong after software or parts work medium
  • Shift fork or synchronizer damaged medium

Symptoms

  • Gear 8 skipped or never reached, higher rpm at cruise
  • Check engine and transmission warning lamp
  • Jerky shifts, possibly loss of one half of a dual-clutch gearbox

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P07D8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication