OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P07D4

Transmission Mode Switch F Circuit

Transmission mode switches select alternative shift programs such as sport, winter, eco or tow/haul; J2012 numbers them A to F without saying which button is which. Switch F is the sixth and last of the family after A (P071A–P071C), B (P071D–P071F), C (P078F, P07CC, P07CD), D (P07CE–P07D0) and E (P07D1–P07D3). No manufacturer document available to us uses switches C to F; GM reads its analog drive mode switch under its own codes (low below 21–29 % of 5 V, high from 94 %, two trips), newer selectors under P05D0–P05D3. P07D4 is the general circuit fault of switch F: its state is invalid or implausible, for example two contacts at once or an in-between value. The program behind it cannot be selected; the MIL normally stays off. Low and high are P07D5/P07D6.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / D4

Possible causes

  • Switch or button faulty or sticking high
  • Wire or connector open or shorted medium
  • Moisture or dirt in the switch medium
  • Control module input low

Symptoms

  • Mode F program cannot be selected or stays active
  • Mode indicator missing or wrong
  • Transmission stays on the normal program

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P07D4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication